Formatting Conventions; Parameter Names - Anritsu LMR Master S412E Programming Manual
An integrated, handheld multi-function land mobile radio test tool
Hide thumbs
Also See for LMR Master S412E:
- User manual (150 pages) ,
- Manual (256 pages) ,
- Maintenance manual (122 pages)
Table of Contents
Advertisement
2-9 Formatting Conventions
2-9
Formatting Conventions
This manual uses the following conventions in describing SCPI commands.
Table 2-7.
Formatting Conventions
:COMMands:LOOK:LIKE:THIS
:COMMand:QUERies:LOOK:LIKE:THIS?
Front panel key sequences use this
formatting.
<identifier>
|
[optional input]
2-10 Parameter Names
The parameters that are returned depend on the firmware version in the S412E, and this
document does not cover all possible parameter values that can be returned by the command.
Parameter names are dependent upon individual applications and are different for each
application. They can be extracted via a Trace Preamble command.
The following tables list the parameter options for the :TRACe:PREamble? command in
each supported measurement mode:
LMR Master, refer to:
•
Table 5-3, "Trace Header Parameters" on page
•
Table 5-4, "Trace Header Marker Parameters" on page 5-62
•
Table 5-5, "Trace Header Limits Parameters" on page 5-63
Vector Voltmeter, refer to
Spectrum Analyzer, refer to
on page
4-38.
Fixed and Mobile WiMAX, refer to
WiMAX Mode" on page
P25, refer to
Table 10-1, "Returned Parameter Values in Trace Preamble" on page
P25p2, refer to
Table 11-1, "Returned Parameter Values in Trace Preamble" on page
NXDN, refer to
Table 12-1, "Returned Parameter Values in Trace Preamble" on page
dPMR, refer to
Table 13-1, "Returned Parameter Values in Trace Preamble" on page
DMR 2, refer to
Table 14-1, "Returned Parameter Values in Trace Preamble" on page
PTC, refer to
Table 15-1, "Returned Parameter Values in Trace Preamble" on page
NBFM, refer to
Table 16-1, "Returned Parameter Values in Trace Preamble" on page
TETRA, refer to
Table 17-1, "Returned Parameter Values in Trace Preamble" on page
2-12
Table 6-2, "Trace Header Parameters" on page
Table 4-1, "Available Parameters in Spectrum Analyzer Mode"
Table 7-1, "Available Parameters in WiMAX and Mobile
7-22.
PN: 10580-00319 Rev. N
Commands are formatted to differentiate them
from their description.
The query form of the command is followed by
a "?"
Front panel key presses are formatted to
differentiate them from text descriptions. Key
presses are separated by a comma (",").
Identifiers are enclosed in angular brackets, "< >".
They indicate that some type of data must be
provided. Refer to
Table 2-3 on page 2-7
details on the types of identifiers.
The pipe (or vertical bar), "|" indicates that a
choice must be made.
Optional input is enclosed in square brackets,
"[ ]". The "[ ]" are not part of the command.
5-54.
Programming with SCPI
for
6-7.
10-24.
11-27.
12-24.
13-23.
14-30.
15-28.
16-31.
17-23.
S412E PM
Advertisement
Table of Contents
