Anritsu LMR Master S412E Programming Manual page 257

Mobile WiMAX Commands
[:SENSe]:FREQuency:CENTer <freq>
[:SENSe]:FREQuency:CENTer?
Title: Center Frequency
Description: Sets the center frequency. Note that changing the value of the center
Parameter: <freq>
Default Value: 2.5 GHz
Default Unit: Hz
Range: 0 Hz to 7.1 GHz
Front Panel Access: Freq, Center Freq
[:SENSe]:FREQuency:SIGStandard:CHANnel <number>
[:SENSe]:FREQuency:SIGStandard:CHANnel?
Title: Channel Selection
Description: Sets the channel number for the selected signal standard.
Parameter: <number>
Front Panel Access: Freq, Channel
[:SENSe]:FREQuency:SIGStandard:NAMe <string>
[:SENSe]:FREQuency:SIGStandard:NAMe?
Title: Signal Standard
Description: Selects the desired signal standard from the list. The <string>
Parameter: <string>
Front Panel Access: Freq, Signal Standard
S412E PM
frequency will change the value of the coupled parameters Start
Frequency and Stop Frequency. It may also change the value of the
span.
argument is the name of the desired signal standard as displayed in the
instrument's current signal standard list. The list can be displayed on
the instrument by choosing the Signal Standard submenu button in the
Freq menu. The list can also be downloaded remotely and viewed using
Anritsu Master Software Tools. For example, if the desired Signal
Standard is P-GSM 900 - Uplink then the value of the <string>
argument would be "P-GSM 900 - Uplink".
The query form of this command will return the name of the currently
selected Signal Standard on the list.
PN: 10580-00319 Rev. N
8-11 [:SENSe] Subsystem
8-25