Anritsu LMR Master S412E Programming Manual page 140

5-2 :CALCulate Subsystem
:CALCulate:TRANsform:DISTance:STARt
:CALCulate:TRANsform:DISTance:STARt?
Description: Sets the start distance for DTF measurements. The query version of
Cmd Parameter: <NRf> (meters or feet)
Query Response: <NR3> (millimeters or feet)
Default Value: 0.0 mm
Default Unit: Meters (m) when setting, Millimeters (mm) for query
Range: –3000.0 m to +3000.0 m
Example: To set the start distance to 5 meters:
Front Panel Access: Freq/Dist, Start Dist
:CALCulate:TRANsform:DISTance:STOP
:CALCulate:TRANsform:DISTance:STOP?
Description: Sets the stop distance for DTF measurements. The query version of this
Cmd Parameter: <NRf> (meters or feet)
Query Response: <NR3> (millimeters or feet)
Default Value: 6850 mm
Default Unit: Meters (m) when setting, Millimeters (mm) for query
Range: –3000.0 m to +3000.0 m
Front Panel Access: Freq/Dist, Stop Dist
5-32
this command returns the start distance in millimeters if the current
distance unit is set to meter, and otherwise returns the start distance in
feet.
:CALC:TRAN:DIST:STAR 5
To set the start distance to 6 millimeters:
:CALCulate:TRANsform:DISTance:STARt 6mm
command returns the stop distance in millimeters if the current
distance unit is set to meter, and otherwise returns the stop distance in
feet.
PN: 10580-00319 Rev. N
VNA Commands
S412E PM