Anritsu LMR Master S412E Programming Manual page 141

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

VNA Commands

:CALCulate:TRANsform:DISTance:UNIT METers|FEET

:CALCulate:TRANsform:DISTance:UNIT?

Description: Sets the units to be used for DTF measurements. The query version of

Syntax: :CALCulate:TRANsform:DISTance:UNIT METers|FEET

Cmd Parameter: <char> METers|FEET

Query Response: <char> METER|FEET

Default Value: METers when setting, METER for query

Example: To set the distance unit to Meter:

Front Panel Access: Shift 8 (System), Application Options, Units

:CALCulate<Tr>:TRANsform:DISTance:DATA?

Description: Produces the distance list in meters for the given trace. <Tr> is the

Cmd Parameter: NA (query only)

Query Response: <char> returns block data (meters)

Default Unit: Meters

Front Panel Access: NA

this command returns the string "METER" if the current distance unit

is set to meter, and otherwise returns the string "FEET".

:CALCulate:TRANsform:DISTance:UNIT?

:CALCulate:TRANsform:DISTance:UNIT METers

:CALC:TRAN:DIST:UNIT MET

To set the distance unit to Feet:

:CALC:TRAN:DIST:UNIT FEET

:CALCulate:TRANsform:DISTance:UNIT FEET

trace number in the range 1 to 8 (1 to 4 for Traces TR1 to TR4 and

5 to 8 for Memory M1 to M4). If no trace number is specified, then the

<Tr> parameter defaults to trace number 1. The response begins with

an ASCII header that specifies the number of data bytes. It appears in

the format #AX, where A is the number of digits in X, and X is the

number of bytes that follow the header. Each distance value is returned

in scientific notation and separated by a comma delimiter.

PN: 10580-00319 Rev. N

5-2 :CALCulate Subsystem