Anritsu LMR Master S412E Programming Manual page 378

12-2 :CONFigure Subsystem
:CONFigure:COVerage
Description: This command configures the NXDN Coverage measurement. Certain
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to NXDN Coverage:
Front Panel Access: Measurement, NXDN Coverage
:CONFigure:SIGAnalyzer
Description: This command configures the NXDN Analyzer measurement. Certain
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to NXDN Analyzer:
Front Panel Access: Measurement, NXDN Analyzer
12-4
settings from the previous measurement (Mapping Type) will be backed
up when exiting this measurement and restored when entering this
measurement. All other settings carry over from one measurement to
the other.
:CONFigure:COVerage
settings from the previous measurement (Ref Lvl, Scale, Graph Types,
Maximize) will be backed up when exiting this measurement and
restored when entering this measurement. All other settings carry over
from one measurement to the other.
:CONFigure:SIGAnalyzer
PN: 10580-00319 Rev. N
NXDN Commands
S412E PM