Anritsu LMR Master S412E Programming Manual page 440

13-11 :TRACe Subsystem
Table 13-1. Returned Parameter Values in Trace Preamble (Sheet 2 of 7)
Parameter Name
GPS_FIX_LONGITUDE
GPS_FIX_LATITUDE
GPS_FIX_VALUE_TIME
GPS_FIX_VALUE_LON
GPS_FIX_VALUE_LAT
RECEIVER_FREQ
EXT_ATT
REF_LVL
REF_LVL_TX
REF_LVL_TOC
SCALE
SCALE_TX
SCALE_TOC
TOC_BER_REF
TOC_MOD_FID_REF
GRAPH_TYPE
GRAPH_TYPE_TX
GRAPH_TYPE_TOC
TRACE_GRAPH_TYPES
TRACE_GRAPH_TYPES_TX
13-24
Current longitude shown in degrees, minutes,
seconds. Even if a file has been recalled, the current
longitude will be returned.
Current latitude shown in degrees, minutes, seconds.
Even if a file has been recalled, the current latitude will
be returned.
Current UTC time shown as seconds elapsed since
0:00 January 1st, 1970. Even if a file has been
recalled, the current UTC time will be returned.
Current longitude shown in radians (as a long data
type). Even if a file has been recalled, the current
longitude will be returned.
Current latitude shown in radians (as a long data
type). Even if a file has been recalled, the current
latitude will be returned.
Receiver (Rx) frequency.
Receiver (Rx) power offset.
Reference level. For Analyzer, this setting
corresponds to the Spectrum graph.
Backup reference level for Analyzer.
Backup reference level for Coverage (Not in use with
new mapping style).
Scale. For Analyzer, this setting corresponds to the
Spectrum graph.
Backup scale for Analyzer.
Backup scale for Coverage (Not in use with new
mapping style).
BER reference percentage (Not in use with new
mapping style).
Mod fid reference percentage (Not in use with new
mapping style).
Graph type of the selected graph (Active graph).
Backup graph type for Analyzer.
Backup graph type for Coverage (Not in use with new
mapping style).
Graph types for all 4 traces. This uses a bit mask shift,
where the bit shift mask is defined as:
GRAPH_TYPE_BIT_SHIFT 16
GRAPH_TYPE_BIT_MASK 0xFFFF
Backup trace graph type for Analyzer.
PN: 10580-00319 Rev. N
dPMR Commands
Description
S412E PM