11-2 :CONFigure Subsystem
:CONFigure:COVerage
Description: This command configures the P25p2 Coverage measurement. Certain
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to P25p2 Coverage:
Front Panel Access: Measurement, P25p2 Coverage
:CONFigure:SIGAnalyzer
Description: This command configures the P25p2 Analyzer measurement. Certain
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to P25p2 Analyzer:
Front Panel Access:Measurement, P25p2 Analyzer
11-4
settings from the previous measurement (Mapping Type) will be backed
up when exiting this measurement and restored when entering this
measurement. All other settings carry over from one measurement to
the other.
:CONFigure:COVerage
settings from the previous measurement (Ref Lvl, Scale, Graph Types,
Maximize) will be backed up when exiting this measurement and
restored when entering this measurement. All other settings carry over
from one measurement to the other.
:CONFigure:SIGAnalyzer
PN: 10580-00319 Rev. N
P25 Phase 2 Commands
S412E PM