Anritsu LMR Master S412E Programming Manual page 83

Spectrum Analyzer Commands
Table 4-1. Available Parameters in Spectrum Analyzer Mode (Sheet 4 of 5)
Parameter Name
ACPR_UPPER_CH_
LINE_MARKER_INFO
AM_FM_DEMOD_VOL
AM_FM_DEMOD_ FREQUENCY
AM_FM_DEMOD_TYPE
AM_FM_DEMOD_TIME
AM_FM_LINE_ MARKER
BEAT_FREQUENCY_
OSC_FREQUENCY
CI_C_TYPE
CI_C_VALUE
CI_I_BB_VALUE
CI_I_NB_VALUE
CI_I_WB_VALUE
CI_BB_VALUE
CI_NB_VALUE
CI_WB_VALUE
MKR_SPA_FREQNx
MKR_SPA_POINTx
MKR_SPA_MAGNTx
MKR_SPA_PRCNTx
S412E PM
Description
Mask off 16 bits at a time to get the display point
location of the 2 ACPR upper channel display
indicators
AM/FM demod volume
AM/FM demod freq
AM/FM demod type
AM/FM demod time
Display point location of the demodulation frequency
BFO oscillator freq
C/I measurement carrier type
C/I measurement measured carrier power
C/I measurement measured broadband interference
power
C/I measurement measured narrowband interference
power
C/I measurement measured wideband interference
power
C/I measurement with broadband interference
C/I measurement with narrowband interference
C/I measurement with wideband interference
Marker x frequency (where x is the marker number
0-11, 0 represent the reference marker #1 and 1
represent delta marker #1, 2 represent reference
marker #2, and 3 represent delta marker #2, and so
on)
Reference marker x display point
Reference marker x magnitude
Reference marker x display percentage
PN: 10580-00319 Rev. N
4-11 :TRACe Subsystem
4-41