Anritsu LMR Master S412E Programming Manual page 370

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

11-13 [:SENSe] Subsystem

Cmd Parameters: <value>

Query Parameters: NA

Range: 0 dBm to -120 dBm or 1 fW to 1000000000000 fW

Default Value: -100 dBm or 100 fW or 2.24 μV

Default Unit: dBm or fW or fV

Example: To set the squelch to -10 dBm:

Front Panel Access: Setup, Squelch Lvl

[:SENSe]:FREQuency:CENTer <value>

[:SENSe]:FREQuency:CENTer?

Description: Sets the receiver center frequency. Please note that setting the center

Cmd Parameters: <value>

Query Parameters: NA

Range: For 1.6 GHz Model: 100000 Hz to 1600000000 Hz

Default Value: 800000000 Hz

Default Unit: Hz

Example: To set the center frequency to 145 MHz:

Front Panel Access: Frequency, Rx Freq

The set command is sent using the units selected with the Rx Units

button on the front panel or with the command: UNIT:POWer:RX. If the

Rx Units has been set to dBm, the squelch setting must be set in dBm.

If the unit is set to watts, the squelch setting must be set in fW. If the

unit is set to Volts, the squelch setting must be set in fV.

or 223.6 mV to 223.61 nV

:DM:SQUelch -10

frequency will restart the sweep

For 6 GHz Model: 100000 Hz to 6000000000 Hz

:FREQuency:CENTer 145000000

PN: 10580-00319 Rev. N

P25 Phase 2 Commands