Chapter 4-Spectrum Analyzer Commands; Abort Subsystem - Anritsu LMR Master S412E Programming Manual

Chapter 4 — Spectrum Analyzer
Commands
4-1

:ABORt Subsystem

The abort subsystem includes commands that allow the user to stop current measurement
activities on the instrument.
:ABORt
Title: Abort
Description: Restarts the current sweep and/or measurement. Resets the trigger
Parameter: NA
Related Command: :INITiate:CONTinuous
S412E PM
system. If :INITiate:CONTinuous is OFF (i.e., the instrument is in
single sweep mode), send the command :INITiate[:IMMediate] to
trigger the next sweep. If :INITiate:CONTinuous is ON (i.e., the
instrument is in continuous sweep mode), a new sweep will start
immediately.
:INITiate[:IMMediate]
PN: 10580-00319 Rev. N 4-1