Anritsu LMR Master S412E Programming Manual page 314

10-11 :TRACe Subsystem
Table 10-1. Returned Parameter Values in Trace Preamble (Sheet 5 of 7)
Parameter Name
RSSI_MAPPING_GOOD
RSSI_MAPPING_FAIR
RSSI_MAPPING_POOR
BER_MAPPING_EXCELLENT
BER_MAPPING_VERY_GOOD
BER_MAPPING_GOOD
BER_MAPPING_FAIR
BER_MAPPING_POOR
MOD_FID_MAPPING_EXCELLENT
MOD_FID_MAPPING_VERY_GOOD
MOD_FID_MAPPING_GOOD
MOD_FID_MAPPING_FAIR
MOD_FID_MAPPING_POOR
MAPPING_TYPE
10-28
Threshold at which the RSSI mapping value is
deemed good (Only used in P25, P25p2, NXDN,
dPMR, DMR2, PTC).
Threshold at which the RSSI mapping value is
deemed fair (Only used in P25, P25p2, NXDN, dPMR,
DMR2, PTC).
Threshold at which the RSSI mapping value is
deemed poor (Only used in P25, P25p2, NXDN,
dPMR, DMR2, PTC).
Threshold at which the BER mapping value is deemed
excellent (Only used in P25, P25p2, NXDN, dPMR,
DMR2, PTC).
Threshold at which the BER mapping value is deemed
very good (Only used in P25, P25p2, NXDN, dPMR,
DMR2, PTC).
Threshold at which the BER mapping value is deemed
good (Only used in P25, P25p2, NXDN, dPMR,
DMR2, PTC).
Threshold at which the BER mapping value is deemed
fair (Only used in P25, P25p2, NXDN, dPMR, DMR2,
PTC).
Threshold at which the BER mapping value is deemed
poor (Only used in P25, P25p2, NXDN, dPMR, DMR2,
PTC).
Threshold at which the Mod Fid mapping value is
deemed excellent (Only used in P25, P25p2, NXDN,
dPMR, DMR2, PTC).
Threshold at which the Mod Fid mapping value is
deemed very good (Only used in P25, P25p2, NXDN,
dPMR, DMR2, PTC).
Threshold at which the Mod Fid mapping value is
deemed good (Only used in P25, P25p2, NXDN,
dPMR, DMR2, PTC).
Threshold at which the Mod Fid mapping value is
deemed fair (Only used in P25, P25p2, NXDN, dPMR,
DMR2, PTC).
Threshold at which the Mod Fid mapping value is
deemed poor (Only used in P25, P25p2, NXDN,
dPMR, DMR2, PTC).
Mapping value that is being compared with threshold
values.
PN: 10580-00319 Rev. N
P25 Phase 1 Commands
Description
S412E PM