Display Subsystem - Anritsu LMR Master S412E Programming Manual

NBFM Commands

16-3 :DISPlay Subsystem

This subsystem provides commands that modify the display of data for the user. They do not
modify the way in which data are returned to the controller.
:DISPlay[:WINDow]:TRACe:FORMat:COVerage <mapping type>
:DISPlay[:WINDow]:TRACe:FORMat:COVerage?
Description: Defines the mapping type. <mapping type> is the type of data that is
Cmd Parameters: <mapping type>
Query Parameters: NA
Range: RSSI|THD|SINad|EXTS
Default Value: RSSI
Default Unit: NA
Example: To set mapping type to SINAD:
Related Command: :CONFigure:COVerage
Front Panel Access: Measurement, NBFM Coverage, Mapping Type
:DISPlay[:WINDow]:TRACe:SELect?
Description: This command returns the current active trace number in the format
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To query for the active trace number:
Front Panel Access: Measurement, NBFM Analyzer, Active Graph
S412E PM
being mapped. Note that RSSI, THD, SINAD, and External SINAD
data will be stored, but only the selected mapping type will be used in
the comparisons to determine the color of the points on the map.
Mapping type must be one of the following values:
RSSI|THD|SINad|EXTS
The query version of this command returns "RSSI" if the mapping type
is set to RSSI, "THD" if set to THD, "SIN" if set to SINAD, and "EXTS"
if set to External SINAD.
Please note that this command only works when the current
measurement is set to NBFM Coverage. Refer to the Related Command.
:DISPlay:TRACe:FORMat:COVerage SINad
TRAC#.
:DISPlay:TRACe:SELect?
PN: 10580-00319 Rev. N
16-3 :DISPlay Subsystem
16-5