Anritsu LMR Master S412E Programming Manual page 545

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

PTC Commands

[:SENSe]:DM:FORMat 4FSK|DQPSK

[:SENSe]:DM:FORMat?

Description: Sets the modulation type. The query will return 4FSK for 4FSK and

Cmd Parameters: 4FSK|DQPSK

Query Parameters: NA

Range: 4FSK|DQPSK

Default Value: 4FSK

Default Unit: NA

Example: To set the modulation type to DQPSK:

Front Panel Access: Setup, Mod Type

[:SENSe]:DM:SQUelch <value>

[:SENSe]:DM:SQUelch?

Description: Sets the squelch power level. The squelch is only applied to the PTC

DQPS for DSPSK. Please note that setting the modulation type will

restart the sweep.

:DM:FORMat DQPSK

Analyzer Summary window on the front panel and will blank out (--) all

summary measurements except for Received Pwr when the received

power level is lower than the squelch power setting.

FETCh:SIGAnalyzer?, READ:SIGAnalyzer?, and

MEASure:SIGAnalyzer? will always return all numerical values.

The query will be returned in the units (dBm, Watts, or Volts) selected

through the Rx Units button using the front panel or with the

command: UNIT:POWer:RX. If the Rx Units has been set to dBm, the

squelch setting is returned in dBm. If the unit is set to Watts, the

squelch setting is returned in fW. If the unit is set to Volts, the squelch

setting is returned in fV.

PN: 10580-00319 Rev. N

15-13 [:SENSe] Subsystem