[:Sense]:Sweep Subsystem - Anritsu LMR Master S412E Programming Manual

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

VNA Commands

[:SENSe]:SWEep Subsystem

This subsystem includes commands that affect the sweep parameters of the instrument.

[:SENSe]:SWEep:IFBW <freq value>

[:SENSe]:SWEep:IFBW?

Description: Sets the IF Bandwidth. The <freq value> in Hz must be one of the

Cmd Parameter: <char> <freq value>

Query Response: <char> <freq value>

Default Value: 10000

Default Units: Hz

Range: 10 to 100000 Hz

Example: Sets the IF Bandwidth frequency to 200 Hz:

Front Panel Access: Shift-3 (Sweep), IFBW

[:SENSe]:SWEep:POINts <integer>

[:SENSe]:SWEep:POINts?

Description: Sets the total number of measurement points per sweep. Note that a

Syntax: :SWEep:POINts <integer>

Cmd Parameter: <NR1> <integer>

Query Response: <NR1> <integer>

Default Value: 201

Range: 2 to 4001

Front Panel Access: Shift-3 (Sweep), Data Points

following 13 values:

100000|50000|20000|10000|5000|2000|1000|500|200|

100|50|20|10

The query form of this command returns the frequency in Hz.

:SENS:SWE:IFBW 200

Sets the IF Bandwidth frequency to 100 kHz:

:SENS:SWE:IFBW 100000

sweep with a lower number of data points will complete in less time

than a sweep with a higher number of data points.

:SWEep:POINts?

PN: 10580-00319 Rev. N

5-11 [:SENSe] Subsystem