Anritsu LMR Master S412E Programming Manual page 570

16-7 :MEASure Subsystem
:MEASure:SNDRatio?
Description: Sets the active measurement to NBFM SINAD, triggers a new
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To measure NBFM SINAD numerical data:
Front Panel Access: NA
16-20
measurement and returns the numerical results. It is a combination of
the commands :CONFigure:SNDRatio and :READ:SNDRatio?
Data is returned as 1 value in the following order and format:
Measured SINAD (dB as float).
If there is no valid measurement data, the instrument will return "--".
:MEASure:SNDRatio?
PN: 10580-00319 Rev. N
NBFM Commands
S412E PM