Display Subsystem - Anritsu LMR Master S412E Programming Manual

17-3 :DISPlay Subsystem

17-3 :DISPlay Subsystem
This subsystem provides commands that modify the display of data for the user. They do not
modify the way in which data are returned to the controller.
:DISPlay[:WINDow]:TRACe:SELect?
Description: This command returns the current active trace number in the format
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To query for the active trace number:
Front Panel Access: Measurement, TETRA Analyzer, Active Graph
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:PDIVision <value>
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:PDIVision?
Description: Sets the scale per division for the y-axis. In the TETRA Analyzer
Cmd Parameters: <value>
Query Parameters: NA
Range: 1 to 15
Default Value: 10
Default Unit: NA
Example: To set the scale to 8:
Front Panel Access: Amplitude, Scale
17-4
TRAC#.
:DISPlay:TRACe:SELect?
measurement, this value corresponds to the scale on the spectrum
graph type.
:DISPlay:TRACe:Y:PDIVision 8
PN: 10580-00319 Rev. N
TETRA Commands
S412E PM