Fetch Subsystem - Anritsu LMR Master S412E Programming Manual

NBFM Commands

16-4 :FETCh Subsystem

This set of commands returns the most recent measurement data of the active measurement.
They will not switch to another measurement mode.
To prepare for a new measurement, use the CONFigure command. To make a new
measurement, use the INITiate command. To get new measurement data, use the READ or
MEASure query commands.
:FETCh:COVerage?
Description: Returns the most recent NBFM Coverage numerical measurement
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To fetch NBFM Coverage numerical data:
Related Command: :CONFigure:COVerage
Front Panel Access: NA
S412E PM
results. Note that this command only functions in the NBFM
measurement mode and when the instrument has a valid GPS lock.
Data is returned as 8comma-separated values in the following order
and format:
RSSI (dBm as float)
THD (% as float)
SINAD (dB as float)
ExtSINAD (dB as float)
Latitude (radian as float)
Longitude (radian as float)
UTC Date (month/day/year as char)
UTC Time (hour:minute:second as char)
If there is no valid measurement data, the instrument will return
"--,--,--,--,--,--,--,--".
:FETCh:COVerage?
PN: 10580-00319 Rev. N
16-4 :FETCh Subsystem
16-9