Anritsu LMR Master S412E Programming Manual page 546

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

15-13 [:SENSe] Subsystem

Cmd Parameters: <value>

Query Parameters: NA

Range: 0 dBm to -120 dBm or 1 fW to 1000000000000 fW

Default Value: -100 dBm or 100 fW or 2.24 μV

Default Unit: dBm or fW or fV

Example: To set the squelch to -10 dBm:

Front Panel Access: Setup, Squelch Lvl

[:SENSe]:DM:SYMBol:RATE 6000|8000|12000|16000|18000

[:SENSe]:DM:SYMBol:RATE?

Description: Sets the symbol rate of the signal generator.

Cmd Parameters: 6000|8000|12000|16000|18000

Query Parameters: NA

Range: 6000|8000|12000|16000|18000

Default Value: 6000

Default Unit: NA

Example: To set the symbol rate to 16000:

Front Panel Access: Setup, Symbol Rate

The set command is sent using the units selected with the Rx Units

button on the front panel or with the command: UNIT:POWer:RX. If the

Rx Units has been set to dBm, the squelch setting must be set in dBm.

If the unit is set to watts, the squelch setting must be set in fW. If the

unit is set to Volts, the squelch setting must be set in fV.

or 223.6 mV to 223.61 nV

:DM:SQUelch -10

:DM:SYMBol 16000

PN: 10580-00319 Rev. N

PTC Commands