Anritsu LMR Master S412E Programming Manual page 133

VNA Commands
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MAXimum
Description: Puts the specified marker at the maximum value in the trace. Note that
Cmd Parameter: NA
Query Response: NA (no query)
Related Command: :CALCulate:MARKer[1]|2|3|4|5|6|7|8:MINimum
Front Panel Access: Marker, Marker Search, Peak Search
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MINimum
Description: Puts the specified marker at the minimum value in the trace. Note that
Cmd Parameter: NA
Query Response: NA (no query)
Related Command: :CALCulate:MARKer[1]|2|3|4|5|6|7|8:MAXimum
Front Panel Access: Marker, Marker Search, Valley Search
:CALCulate:MARKer<Mk>:REFerence[:STATe] OFF|ON|0|1
:CALCulate:MARKer<Mk>:REFerence[:STATe]?
Description: Sets the specified marker <Mk> as the active marker and turn it on or
Syntax: :CALCulate:MARKer<Mk>:REFerence[:STATe] OFF|ON|0|1
Cmd Parameter: <boolean> OFF|ON|0|1
Query Response: <bNR1> 0|1
Default Value: OFF
Example: To turn on marker #3 and set it as reference marker:
S412E PM
this turns on the selected marker (if it is not already on) and sets the
selected marker as the active marker.
this turns on the selected marker (if it is not already on) and set the
selected marker as the active marker.
off. If the value is set to ON or 1, the specified marker is turn on and set
as a reference marker. If the value is set to OFF or 0, the specified
marker is turn off. The query version of the command returns a 1 if the
specified marker is ON and is a reference marker, and returns a 0 if not.
<Mk> is the marker number in the range of 1 to 8. If no marker number
is specified, then the marker number (the <Mk> value) defaults to 1.
:CALCulate:MARKer<Mk>:REFerence[:STATe]?
:CALCulate:MARKer3:REFerence ON
:CALCulate:MARKer3:REFerence 1
:CALCulate:MARKer3:REFerence:STATe ON
:CALCulate:MARKer3:REFerence:STATe 1
PN: 10580-00319 Rev. N
5-2 :CALCulate Subsystem
5-25