PTC Commands
:CONFigure:COVerage
Description: This command configures the PTC Coverage measurement. Certain
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to PTC Coverage:
Front Panel Access: Measurement, PTC Coverage
:CONFigure:SIGAnalyzer
Description: This command configures the PTC Analyzer measurement. Certain
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to PTC Analyzer:
Front Panel Access: Measurement, PTC Analyzer
S412E PM
settings from the previous measurement (Mapping Type) will be backed
up when exiting this measurement and restored when entering this
measurement. All other settings carry over from one measurement to
the other.
:CONFigure:COVerage
settings from the previous measurement (Ref Lvl, Scale, Graph Types,
Maximize) will be backed up when exiting this measurement and
restored when entering this measurement. All other settings carry over
from one measurement to the other.
:CONFigure:SIGAnalyzer
PN: 10580-00319 Rev. N
15-2 :CONFigure Subsystem
15-3