Anritsu LMR Master S412E Programming Manual page 325

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

P25 Phase 1 Commands

[:SENSe]:DM:PATTern 1011hz|O.153|VOICe|CTRLchan

[:SENSe]:DM:PATTern?

Description: Sets the receiver pattern type. Please note that setting the Rx Pattern

Cmd Parameters: 1011hz|O.153|VOICe|CTRLchan

Query Parameters: NA

Range: 1011hz|O.153|VOICe|CTRLchan

Default Value: 1011hz

Default Unit: NA

Example: To set the modulation type to voice:

Front Panel Access: Setup, Rx Pattern

[:SENSe]:FREQuency:CENTer <value>

[:SENSe]:FREQuency:CENTer?

Description: Sets the receiver center frequency. Please note that setting the center

Cmd Parameters: <value>

Query Parameters: NA

Range: For 1.6 GHz Model: 100000 Hz to 1600000000 Hz

Default Value: 800000000 Hz

Default Unit: Hz

Example: To set the center frequency to 145 MHz:

Front Panel Access: Frequency, Rx Freq

will restart the sweep.

:DM:PATTern VOICe

frequency will restart the sweep

For 6 GHz Model: 100000 Hz to 6000000000 Hz

:FREQuency:CENTer 145000000

PN: 10580-00319 Rev. N

10-13 [:SENSe] Subsystem