Anritsu LMR Master S412E Programming Manual page 136

5-2 :CALCulate Subsystem
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:Y?
Description: Reads the current Y value for the specified marker. The units are in the
Table 5-2. Returned Readout Style
Returned Value Symbols
R&I: (real, imaginary)
SWR: magnitude
LM: magnitude dB
LNM: magnitude dB
LMP: (magnitude dB, phase deg)
LNMP: (magnitude dB, phase deg)
PH: phase deg
Z: (real impedance ohm,
imaginary impedance ohm)
PZ: (magnitude impedance ohm,
phase impedance deg)
NZ: (real normalized impedance,
imaginary normalized impedance)
Y: (real admittance S,
imaginary admittance S)
NY: (real normalized admittance,
imaginary normalized admittance)
GD: group delay unit
LM/2: magnitude dB
Cmd Parameter: NA (query only)
Query Response: <NR3> (depends on display type)
Default Units: Current y-axis unit
Related Command: :CALCulate:MARKer#:DOMain?
Front Panel Access: NA
5-28
y-axis unit. The command returns the marker readout style followed by
the Y value and unit. If an error occurs, such as marker not ON, the
command returns an error code of –400. The selected marker must be
ON for the command to be valid.
:CALCulate:MARKer<Mk>:FORMat <Style>
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:X?
PN: 10580-00319 Rev. N
Graph Type
Real and Imaginary
SWR
Log Mag
Lin Mag
Log Mag & Phase
Lin Mag and Phase
Phase
Impedance
Polar Impedance
Normalized Impedance
Admittance
Normalized Admittance
Group Delay
LogMag/2
VNA Commands
S412E PM