Status Subsystem - Anritsu LMR Master S412E Programming Manual

All Mode Commands
3-5

:STATus Subsystem

The commands in this subsystem relate to the current operating state of the instrument.
:STATus:OPERation?
Title: Query Operation Status
Description: This command requests information about the current status of the
Bit Decimal Value
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Cmd Parameter: NA (query only)
Query Response: <decimal> (0 to 15 bit)
Front Panel Access: NA
S412E PM
instrument. Each bit of the return value represents some operation.
Only a subset of the bits are implemented for each application. The
number returned is the decimal representation of the bit-wise OR of
the enabled bits.
1 Not implemented
2 Not implemented
4 Not implemented
8 Not implemented
16 Not implemented
32 Not implemented
64 Not implemented
128 Not implemented
256 Sweep Complete – This bit will be set to 0 when the command
:INITiate[:IMMediate] is sent to trigger a sweep. It will have a
value of 1 when the sweep has completed.
512 Not implemented
1024 Not implemented
2048 Not implemented
4096 Not implemented
8192 Not implemented
16384 Not implemented
0 Will always be 0
PN: 10580-00319 Rev. N
3-5 :STATus Subsystem
Description
3-9