Anritsu LMR Master S412E Programming Manual page 304

10-8 :MMEMory Subsystem
Control Channel, Bit Capture and IQ Data measurements can not be recalled on
Note
the instrument.
:MMEMory:STORe:STATe <integer>,<filename>
Description: Stores the current setup into the file specified by <filename>.
Cmd Parameters: <integer>,<filename>
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To save a setup file:
Front Panel Access: Shift 7 (File), Save
:MMEMory:STORe:TRACe <integer>,<filename>
Description: Stores the trace into the file specified by <filename>. <filename>
Cmd Parameters: <integer>,<filename>
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To save a measurement file:
Front Panel Access: Shift 7 (File), Save Measurement
Control Channel, Bit Capture and IQ Data measurements can not be saved on the
Note
instrument.
10-18
<filename> should be enclosed in either single quotes (' ') or double
quotes (" ") and should not contain a file extension. Use the command
MMEMory:MSIS to set the current save location. The <integer>
parameter is not currently used, but it must be sent. Send a value of 0.
:MMEMory:STORe:STATe 0,"xxx"
should be enclosed in either single quotes (' ') or double quotes (" ") and
should not contain a file extension. Use the command MMEMory:MSIS
to set the current save location. The <integer> parameter is not
currently used, but it must be sent. Send a 0.
:MMEMory:STORe:TRACe 0,"xxx"
PN: 10580-00319 Rev. N
P25 Phase 1 Commands
S412E PM