Anritsu LMR Master S412E Programming Manual page 640

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

17-13 [:SENSe] Subsystem

[:SENSe]:FREQuency:CENTer <value>

[:SENSe]:FREQuency:CENTer?

Description: Sets the receiver center frequency. Please note that setting the center

Cmd Parameters: <value>

Query Parameters: NA

Range: For 1.6 GHz Model: 100000 Hz to 1600000000 Hz

Default Value: 800000000 Hz

Default Unit: Hz

Example: To set the center frequency to 145 MHz:

Front Panel Access: Frequency, Rx Freq

[:SENSe]:FREQuency:SPAN 25|50|100|500|1000|5000

[:SENSe]:FREQuency:SPAN?

Description: Sets the span of the Spectrum display in TETRA Analyzer

Cmd Parameters: 25|50|100|500|1000|5000

Query Parameters: NA

Range: 25|50|100|500|1000|5000

Default Value: 25

Default Unit: kHz

Example: To set the span to 1 MHz:

Front Panel Access: Frequency, Span

frequency will restart the sweep

For 6 GHz Model: 100000 Hz to 6000000000 Hz

:FREQuency:CENTer 145000000

measurement mode.

Note: Span value is set and returned in kHz.

:SENSe:FREQuency:SPAN 1000

PN: 10580-00319 Rev. N

TETRA Commands