Anritsu LMR Master S412E Programming Manual page 328

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

10-13 [:SENSe] Subsystem

[:SENSe]:POWer[:RF]:RANGe:AUTO OFF|ON|0|1

[:SENSe]:POWer[:RF]:RANGe:AUTO?

Description: Turns auto range for the receiver on or off. When auto range is on, the

Cmd Parameters: OFF|ON|0|1

Query Parameters: NA

Range: OFF|ON|0|1

Default Value: ON or 1

Default Unit: NA

Example: To turn auto ranging off:

Front Panel Access: Amplitude, Auto Rx Range

[:SENSe]:SYMBolspan <value>

[:SENSe]:SYMBolspan?

Description: Sets the symbol span. Please note that this setting only affects the

Cmd Parameters: <value>

Query Parameters: NA

Range: 2 to 5

Default Value: 2

Default Unit: NA

Example: To set the symbol span to 4:

Front Panel Access: Measurement, P25 Analyzer, Symbol Span

reference level is automatically adjusted to the proper value to show the

trace on the screen. If the auto ranging is turned off, the reference level

will not adjust according to where the trace is. In P25 Analyzer

measurement, this command adjusts the reference level of the spectrum

:POWer:RANGe:AUTO OFF

Eye Diagram in the P25 Analyzer measurement. Please note that

setting the symbol span will restart the sweep.

:SYMBolspan 4

PN: 10580-00319 Rev. N

P25 Phase 1 Commands