Anritsu LMR Master S412E Programming Manual page 601

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

NBFM Commands

[:SENSe]:OBWidth:PERCent <percentage>

[:SENSe]:OBWidth:PERCent?

Description: This command sets the percentage of carrier power that is used to

Cmd Parameters: <percentage>

Query Parameters: NA

Range: 0% to 100%

Default Value: 99%

Default Unit: %

Example: To change the occ bw percent to 70%:

Front Panel Access: Measurement, NBFM Analyzer, Occ BW Setup, % Int Pwr

[:SENSe]:OBWidth:XDB <rel ampl>

[:SENSe]:OBWidth:XDB?

Description: This command sets the number of dB below the carrier used to measure

Cmd Parameters: <rel ampl>

Query Parameters: NA

Range: 0 dBc to 100 dBc

Default Value: 3 dBc

Default Unit: dBc

Example: To change the occ bw XDB to 10:

Front Panel Access: Measurement, NBFM Analyzer, Occ BW Setup, > dBc

measure the occupied bandwidth. This value is used in the

measurement if :SENSe:OBWidth:METHod is set to PERCent.

:OBWidth:PERCent 70.00

the occupied bandwidth. This value is used in the measurement if

:SENSe:OBWidth:METHod is set to XDB.

:OBWidth:XDB 10

PN: 10580-00319 Rev. N

16-13 [:SENSe] Subsystem