Anritsu LMR Master S412E Programming Manual page 87

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

Spectrum Analyzer Commands

:TRACe{1|2|3}:LOAD:DISPlay[:STATe] OFF|ON|0|1

:TRACe{1|2|3}:LOAD:DISPlay[:STATe]?

Title: Trace View State

Description: Specifies whether the specified recall trace should be displayable

Parameter: OFF|ON|0|1

Parameter Type: <boolean>

Default Value: OFF

Example: To set Trace A to Blank:

Front Panel Access: Shift-5 (Trace), Trace [A/B/C], View Blank

These SCPI commands are applicable only if the user selects the option to recall

the trace to Trace A and not show the live trace.

(visible) or hidden. TRACe1 corresponds to Trace A, TRACe2

corresponds to Trace B, and TRACe3 corresponds to Trace C. Setting

the value to ON or 1 will set the specified trace visible. Setting the value

to OFF or 0 will set the specified trace hidden. Note that this command

is valid only if there is a trace recalled.

:TRACe:LOAD:DISPlay OFF

:TRACe1:LOAD:DISPlay 0

To set Trace B to View:

:TRACe2:LOAD:DISPlay ON

:TRACe2:LOAD:DISPlay:STATe ON

:TRACe2:LOAd:DISPlay 1

PN: 10580-00319 Rev. N

4-11 :TRACe Subsystem