Anritsu LMR Master S412E Programming Manual page 658

18-7 [:SENSe] Subsystem
[:SENSe]:AFPanalyzer:SWEep:TIME <time>
[:SENSe]:AFPanalyzer:SWEep:TIME?
Title: Audio Waveform sweep time
Description: Sets the audio waveform sweep time in the audio waveform view.
Parameter: <time>
Default Unit: Secs
Range: 50 µs to 50 ms.
Front Panel Access: Shift-4 (Measure), Audio Waveform, Sweep Time
[:SENSe]:AFPanalyzer:SUMMary:DATA?
Title: Summary data
Description: This query returns the measurment values in the Summary view. The
Front Panel Access: Shift-4 (Measure), Summary.
[:SENSe]:FREQuency:CENTer <freq>
[:SENSe]:FREQuency:CENTer?
Title: Center Frequency
Description: Sets the center frequency. Note that changing the value of the center
Parameter: <freq>
Default Unit: Hz
Front Panel Access: Freq, Center Freq
[:SENSe]:FREQuency:SIGStandard:CHANnel <number>
[:SENSe]:FREQuency:SIGStandard:CHANnel?
Title: Channel Selection
Description: Sets the channel number for the selected signal standard.
Parameter: <number>
Front Panel Access: Freq, Channel
18-16
order of the values are as follows:
<demod type> (AM|FM|PM), <RMS Deviation> in % or Hz or Rad
depending on the demod type, <Peak+ Deviation> in % or Hz or Rad
depending on the demod type, <Peak-Dev> in % or Hz or Rad depending
on the demod type,
<Peak-Peak/2 Dev> in % or Hz or Rad depending on the demod type,
<carrier power> in dBm, <carrier freq> in Hz, <Occ BW> in Hz,
<Modulation rate> in Hz, <SINAD> in dB, <THD> in % and
<Distortion> in %. All values are comma separated.
frequency may also change the value of the span.
PN: 10580-00319 Rev. N
AM/FM/PM Commands
S412E PM