Anritsu LMR Master S412E Programming Manual page 538

15-11 :TRACe Subsystem
Table 15-1. Returned Parameter Values in Trace Preamble (Sheet 7 of 7)
Parameter Name
THD_MAPPING_EXCELLENT
THD_MAPPING_VERY_GOOD
THD_MAPPING_GOOD
THD_MAPPING_FAIR
THD_MAPPING_POOR
AUTO_SCAN
OCC_BW_METHOD
OCC_BW_PERCENT
OCC_BW_DBC
TONE_TYPE
CTCSS_FREQ
DCS_TYPE
DTMF_TONE
FREQ_DISPLAY_TYPE
TONE_DEVIATION
IF_BANDWIDTH
IF_BANDWIDTH_PERCENT
WACN_ID
SYSTEM_ID
COLOR_CODE
15-34
Threshold at which the THD mapping value is deemed
excellent (Only used in NBFM).
Threshold at which the THD mapping value is deemed
very good (Only used in NBFM).
Threshold at which the THD mapping value is deemed
good (Only used in NBFM).
Threshold at which the THD mapping value is deemed
fair (Only used in NBFM).
Threshold at which the THD mapping value is deemed
poor (Only used in NBFM).
State of auto scan. Determines if instrument will
automatically scan for a signal and set the receiver
frequency to the signal with the highest signal strength
(Only used in NBFM). 1 is OFF and 0 is ON.
Occupied bandwidth method (Only used in NBFM).
0 is % Int Power and 1 is > dBc.
% Int Power (Only used in NBFM).
> dBc (Only used in NBFM).
Tone type selection (Only used in NBFM). Determines
display of the last summary slot. 0 is CTCSS, 1 is
DCS, and 2 is DTMF.
Frequency of CTCSS generator pattern (Only used in
NBFM).
Type of DCS generator pattern (Only used in NBFM).
Tone of DTMF generator pattern (Only used in NBFM).
Determines whether carrier frequency or frequency
error is shown in the summary window (Only used in
NBFM). 0 is Carrier Frequency, 1 is Frequency Error.
Tone deviation for the nbmf_ctcss, nbfm_dcs,
nbfm_1khz_ctcss, and nbfm_1khz_dcs generator
patterns (Only used in NBFM).
IF Bandwidth setting (Only used in NBFM). 0 is 5 kHz,
1 is 6.25 kHz, 2 is 10 kHz, 3 is 12.5 kHz, 4 is 30 kHz,
5 is 50 kHz.
Percent of IF Bandwidth used to calculate Y-Axis for
Audio Spectrum and Audio Waveform graphs in NBFM
Analyzer (Only used in NBFM).
Not used.
Not used.
Not used.
PN: 10580-00319 Rev. N
PTC Commands
Description
S412E PM