Anritsu LMR Master S412E Programming Manual page 189

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

VNA Commands

[:SENSe]:TRACe<Tr>:SELect

Description: Selects the given trace, <Tr>, as the active trace. <Tr> is the trace

Cmd Parameter: NA

Query Response: NA (no query)

Default Value: TR1

Example: To set trace 2 as the active trace:

Front Panel Access: Measure, Active Trace

[:SENSe]:TRACe<Tr>:SPARams S11|S21

[:SENSe]:TRACe<Tr>:SPARams?

Description: Defines the S-parameter for the given trace, <Tr>.

Syntax: :TRACe<Tr>:SPARams S11|S21

Cmd Parameter: <char> [S11|S21

Query Response: <char> [S11|S21

Default Value: Trace 1: S11

Example: To assign S11 to trace 2:

Front Panel Access: Measure, S Parameter

number in the range 1 to 4. If no trace number is specified, then the

<Tr> parameter defaults to trace number 1. Note that this may also

change the total number of traces.

:SENSe:TRACe2:SELect

:SENS:TRAC2:SEL

To set trace 1 as the active trace:

:SENSe:TRACe1:SELect

:SENSe:TRACe:SELect

<Tr> is the trace number in the range 1 to 4. If no trace number is

specified, then the <Tr> parameter defaults to trace number 1. The

query version of this command returns "S11" if the S-parameter is set

to S11, "S21" if set to S21.

:TRACe<Tr>:SPARams?

Trace 2: S21

Trace 3: S11

Trace 4: S21

:SENSe:TRACe2:SPARams S11

PN: 10580-00319 Rev. N

5-11 [:SENSe] Subsystem