Anritsu LMR Master S412E Programming Manual page 377

NXDN Commands
:CONFigure:BITCap
Description: This command configures the NXDN Bit Capture measurement.
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to NXDN Bit Capture:
Related Command: :DM:PATTern VOICe
Front Panel Access: Measurement, NXDN Bit Capture
:CONFigure:CONTrol
Description: This command configures the NXDN Control measurement. Certain
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to NXDN Control:
Related Command: :DM:PATTern VOICe
Front Panel Access: Measurement, NXDN Control
S412E PM
Certain settings from the previous measurement (Ref Lvl, Scale, Graph
Types, Maximize) will be backed up when exiting this measurement and
restored when entering this measurement. All other settings carry over
from one measurement to the other. Please note that you must have the
Rx pattern set to VOICe to set the NXDN Bit Capture measurement.
:CONFigure:BITCap
settings from the previous measurement (Ref Lvl, Scale, Graph Types,
Maximize) will be backed up when exiting this measurement and
restored when entering this measurement. All other settings carry over
from one measurement to the other. Please note that you must have the
Rx pattern set to VOICe or CTRLchan to set the NXDN Control
measurement.
:CONFigure:CONTrol
:DM:PATTern CTRLchan
PN: 10580-00319 Rev. N
12-2 :CONFigure Subsystem
12-3