Anritsu LMR Master S412E Programming Manual page 37

An integrated, handheld multi-function land mobile radio test tool
Hide thumbs Also See for LMR Master S412E:
Table of Contents

Advertisement

All Mode Commands
:MMEMory:MSIS:COPY
Title: Copy from Current Save Location to Destination
Description: Copies all files and folders from the current save location to the
Related Command: :MMEMory:MSIS
Front Panel Access: Shift-7 (File), Copy
:MMEMory:MSIS:DESTination INTernal|USB
:MMEMory:MSIS:DESTination?
Title: Destination of Copied Files
Description: Sets the destination location for files copied with the
Cmd Parameter: INTernal|USB
Query Response: INT|USB
Parameter Type: <char>
Related Command: :MMEMory:MSIS
Front Panel Access: Shift-7 (File), Copy, (select drive or folder under Select Destination)
S412E PM
destination. File hierarchy is maintained. In remote operation, files can
only be copied from internal memory to the USB device or from USB to
internal memory. If you wish to copy to the same memory device or copy
specific files and folders, use the instrument front panel.
The Copy command will not execute if no USB device is plugged in.
Before copying files, send the :SYSTem:MSIS? USB command to query
the ready state of the USB Flash drive.
:MMEMory:MSIS:DESTination
:SYSTem:MSIS[:STATe]?
:MMEMory:MSIS:COPY command. Files and folders will be placed at
the root level of the specified memory device. The Destination command
also sets the current save location. For example, selecting the USB
Flash drive as the destination will set the instrument's internal
memory as the current save location, and vice-versa.
The destination location specified by SCPI command applies to remote
operation. It is independent of and can be different from the destination
selected using the instrument front panel. The query form of this
command returns the destination location setting for remote operation,
not the front panel setting.
This command is ineffective if the specified destination is not available,
such as having no USB device plugged into the USB port. Before setting
the destination location, send the :SYSTem:MSIS? USB command to
query the ready state of the USB drive.
:MMEMory:MSIS:COPY
:SYSTem:MSIS[:STATe]?
PN: 10580-00319 Rev. N
3-4 :MMEMory Subsystem
3-7

Advertisement

Table of Contents
loading

Table of Contents