Anritsu LMR Master S412E Programming Manual page 55

Spectrum Analyzer Commands
:CALCulate:LIMit[:STATe] OFF|ON|0|1
:CALCulate:LIMit[:STATe]?
Title: Limit State
Description: Turns the currently selected limit line (upper or lower) ON or OFF. If
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: OFF
Example: To turn on the currently selected limit line:
Front Panel Access: Shift-6 (Limit), On/Off
:CALCulate:MARKer:AOFF
Title: Turn All Markers Off
Description: Turns off all markers.
Front Panel Access: Marker, More, All Markers Off
:CALCulate:MARKer:PEAK:THReshold <percentage>
:CALCulate:MARKer:PEAK:THReshold?
Title: Peak Threshold
Description: Sets the peak/valley threshold as a percentage of the display.
Parameter: <percentage>
Default Value: 10
Default Unit: %
Range: 0% to 100%
Front Panel Access: Marker, More Peak Options, Peak Threshold
S412E PM
the value is set to ON or 1, the currently selected limit line is ON. If the
value is set to OFF or 0, the currently selected limit line is OFF. The
query version of the command returns a 1 if the currently selected limit
line is ON and returns a 0 if OFF. Use :CALCulate:LIMit:TYPe to set
the currently active limit line.
:CALCulate:LIMit ON
:CALCulate:LIMit:STATe ON
:CALCulate:LIMit:STATe 1
To turn off the currently selected limit line:
:CALCulate:LIMit OFF
:CALCulate:LIMit:STATe 0
:CALCulate:LIMit 0
:CALCulate:MARKer:MAXimum:LEFT and
:CALCulate:MARKer:MAXimum:RIGHt use this value to determine
whether a particular display point qualifies as a peak.
PN: 10580-00319 Rev. N
4-2 :CALCulate Subsystem
4-13