Unit Subsystem - Anritsu LMR Master S412E Programming Manual

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

Spectrum Analyzer Commands

4-13 :UNIT Subsystem

The unit subsystem is used to modify the default units used for related parameters. These

changes affect parameters in both commands and responses.

:UNIT:POWer DBM|DBV|DBMV|DBUV|V|W

:UNIT:POWer?

Title: Measurement Units

Description: Sets the default amplitude units for input, output and display.

Parameter: DBM|DBV|DBMV|DBUV|V|W

Parameter Type: <char>

Default Value: dBm

Front Panel Access: Amplitude, Units

Available units: dBm, dBV, dBmV, dBuV, V, W.

Note that linear units are not operational with SPA V3.06. The set

command is non-operational with SPA V3.06 as well.

PN: 10580-00319 Rev. N

4-13 :UNIT Subsystem