Anritsu LMR Master S412E Programming Manual page 108

4-14 [:SENSe] Subsystem
[:SENSe]:SWEep:STATus?
Description: This command queries the sweep complete status. Returns 1 when the
Cmd Parameter: NA
Query Response: 0 | 1
Related Command: :STATus:OPERation?
Front Panel Access: NA
[:SENSe]:SWEep:TIME[:LLIMit]
[:SENSe]:SWEep:TIME[:LLIMit]?
Title: Minimum Sweep Time
Description: Sets the value of the minimum sweep time parameter. The sweep will
Default Value: 0.001
Default Unit: Seconds
Range: 10 μs to 600000000 μs
Front Panel Access: Shift-3 (Sweep), Sweep Time
[:SENSe]:SWEep:TIME:ACTual?
Title: Actual Sweep Time
Description: Returns the actual sweep time as opposed to the specified sweep time.
Default Unit: Seconds
[:SENSe]:SWEep:TIME:AUTO ON|OFF|1|0
[:SENSe]:SWEep:TIME:AUTO?
Title: Auto Sweep Time
Description: Sets Auto Sweep Time on or off.
Front Panel
Access: Shift-3 (Sweep), Auto Sweep Time
4-66
sweep is complete. Returns 0 when the sweep is in progress.
complete in the shortest time possible greater than the specified time.
To sweep as fast as possible, enter the minimum value allowed for the
sweep time.
PN: 10580-00319 Rev. N
Spectrum Analyzer Commands
S412E PM