Anritsu LMR Master S412E Programming Manual page 48

4-2 :CALCulate Subsystem
:CALCulate:LIMit:LOWer[:STATe] OFF|ON|0|1
:CALCulate:LIMit:LOWer[:STATe]?
Title: Lower Limit State
Description: Turns the lower limit line ON or OFF. It is a combination of the
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: OFF
Example: To turn on lower limit:
Related Command: :CALCulate:LIMit:ALARm
Front Panel Access: Shift-6 (Limit), Limit Lower, Limit On/Off
:CALCulate:LIMit:LTYPe ABSolute|RELative
:CALCulate:LIMit:LTYPe?
Title: Limit Line Type
Description: Sets the currently active limit line type. Absolute limit lines set the
Parameter: ABSolute|RELative
Parameter Type: <char>
Default Value: ABSolute
Range: ABSolute|RELative
Example: To set the limit line type to relative:
Related Command: :CALCulate:LIMit[:STATe]
Front Panel Access: Shift-6 (Limit), Limit Advanced, Limit Line Type
4-6
commands :CALCulate:LIMit:TYPe 1 and :CALCulate:LIMit:STATe
ON|OFF. The query version of the command returns a 1 if the lower
limit line is ON and returns a 0 if OFF.
:CALCulate:LIMit:LOWer ON
:CALCulate:LIMit:LOWer 1
:CALCulate:LIMit:LOWer:STATe ON
To turn off lower limit:
:CALCulate:LIMit:LOWer OFF
:CALCulate:LIMit:LOWer 0
:CALCulate:LIMit:LOWer:STATe 0
limit inflection points based upon the entered frequencies for each
point. Relative limit lines set the limit inflection points relative to the
current center frequency.
:CALCulate:LIMit:LTYPe RELative
PN: 10580-00319 Rev. N
Spectrum Analyzer Commands
S412E PM