Anritsu LMR Master S412E Programming Manual page 255

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

Mobile WiMAX Commands

Parameter: <trace type>

Related Command: :FORMat[:DATA]

Use the commands in the MMEMory subsystem to store and recall

traces from the instrument memory. Except for CONStln there is only

one value per data point. If max hold is set to ON for SPECtrum and

EVM vs. Sub Carrier then the max hold value is returned. For

CONStln, each data point is represented by 3 values 4 bytes each: IData

(no units), QData (no units), and the constellation type (no units). For

SPECtrum and PVTime unit is in dBm. For Spectral Flatness unit is in

dB. For EVM vs Sub Carrier and EVM vs Symbol unit is in percent.

Note that the instrument must be set in the selected view. Use the

CONFigure command to set the unit to the selected view.

:TRACe[:DATA]:PREamble?

PN: 10580-00319 Rev. N

8-10 :TRACe Subsystem