Anritsu LMR Master S412E Programming Manual page 176

5-11 [:SENSe] Subsystem
[:SENSe]:CORRection:IMPedance[:INPut][:MAGNitude]:SMCHart
50|75
[:SENSe]:CORRection:IMPedance[:INPut][:MAGNitude]:SMCHart?
Description: Sets the Smith Chart reference impedance. Sets 50 for 50 ohm. Sets
Cmd Parameter: <char> 50|75
Query Response: <char> 50|75
Default Value: 50
Range: 50, 75
Front Panel Access: Scale, Reference Impedance
[:SENSe]:CORRection[:STATe] OFF|ON
[:SENSe]:CORRection[:STATe]?
Description: Turns the calibration error correction ON or OFF. Note that error
Parameter: OFF|ON
Cmd Parameter: <boolean> OFF|ON|0|1
Query Response: <bNR1> 0|1
Default Value: 0
Front Panel Access: Shift-2 (Calibrate), Cal Correction
5-68
75 for 75 ohm. The query form of the command returns the current
Smith Chart reference impedance in ohms.
correction can be turned ON only if valid calibration is available.
PN: 10580-00319 Rev. N
VNA Commands
S412E PM