Anritsu LMR Master S412E Programming Manual page 162

5-10 :Trace Subsystem
Table 5-3. Trace Header Parameters (Sheet 1 of 8)
Parameter Name
SN
UNIT_NAME
TYPE
DATE
APP_NAME
APP_VER
SUB_MODE
S_TYPE
TRACE_S_TYPES
GRAPH_TYPE
TRACE_GRAPH_TYPES
5-54
Instrument serial #
Instrument name
The data type (Setup or Data)
Trace date/time
Application name
Application firmware (FW) version
Sub Mode type, where:
0 is for Vector Network Analyzer,
2 is for Vector Voltmeter
Active trace S type. Current available S Types
are:
S11 = 0, S21 = 1
S types for all 4 traces. This uses a bit mask,
where the bit shift mask is defined as:
S_TYPE_BIT_SHIFT 4
S_TYPE_BIT_MASK 0xF
For example, to get the S type for trace 1:
(int) (sTypes >> (S_TYPE_BIT_SHIFT * 0)) &
S_TYPE_BIT_MASK
Active Trace graph type. Current available graph
types are:
Log Mag = 0,
SWR = 1,
Phase = 2,
Real = 3,
Imaginary = 4,
Group delay = 5,
Smith Chart = 6,
Log Mag/2 = 7
Linear Polar = 8
Log Polar = 9
Real Impedance = 10
Imaginary Impedance = 11
Graph types for all 4 traces. This uses a bit mask
shift, where the bit shift mask is defined as:
GRAPH_TYPE_BIT_SHIFT 16
GRAPH_TYPE_BIT_MASK 0xFFFF
PN: 10580-00319 Rev. N
VNA Commands
Description
S412E PM