Anritsu LMR Master S412E Programming Manual page 132
An integrated, handheld multi-function land mobile radio test tool
Hide thumbs
Also See for LMR Master S412E:
- User manual (150 pages) ,
- Manual (256 pages) ,
- Maintenance manual (122 pages)
Table of Contents
Advertisement
5-2 :CALCulate Subsystem
:CALCulate:MARKer<Mk>:DOMain?
Description: Query the specified marker <Mk> domain type. <Mk> is the marker
Cmd Parameter: NA (query only)
Query Response: <char> FREQ|DIST
Front Panel Access: NA
:CALCulate:MARKer<Mk>:FORMat <Style>
:CALCulate:MARKer<Mk>:FORMat?
Description: Sets the specified marker <Mk> readout style. <Mk> is the marker
Cmd Parameter: <char> <Style> (GRAPh|LMAGnitude|LOGPhase|and so forth)
Query Response: <char> <Style> (GRAP|LMAG|LOGP|and so forth)
Default Value: GRAP
Example: To set marker #3 readout style to Log Mag:
Related Command: :CALCulate:MARKer<Mk>:Y?,
Front Panel Access: Marker, Readout Style
5-24
number in the range of 1 to 8. If no marker number is specified, then the
marker number (the <Mk> value) defaults to 1. This command returns
"FREQ" if the specified marker domain is frequency and "DIST" if
distance.
number in the range of 1 to 8. If no marker number is specified, then the
marker number (the <Mk> value) defaults to 1. <Style> is the
marker readout style and must be one of the following values:
GRAPh|LMAGnitude|LOGPhase|PHASe|RLIMaginary|SWR|
IMPedance||ADMittance|NIMPedance|NADMittance|
PIMPedance|GDELay|LM/2|LINMagnitude|LINPhase
The query version of the command returns "GRAP" if the specified
marker readout style is set to Graph Type, "LMAG" if the specified
marker readout style is set to Log Magnitude, "LOGP" if Log Mag and
Phase, "PHAS" if Phase, "RLIM" if Real and Imaginary, "SWR" if
standing wave ratio, "IMP" for impedance, "ADM" for admittance,
"NIMP" for normalized impedance, "NADM" for normalized
admittance, "PIMP" for polar impedance, "GDEL" if group delay,
"LM/2" for log mag/2 (cable loss), "LINM" for Linear
Magnitude (Lin Mag), and "LINP" for Linear Magnitude and Phase.
Note that the set version of this command will set the specified marker
as the active marker.
:CALCulate:MARKer3:FORMat LMAG
:CALCulate:MARKer3:FORMat LMAGnitude
:CALC:MARK3:FORM LMAG
:CALCulate:MARKer:DATA?
PN: 10580-00319 Rev. N
VNA Commands
S412E PM
Advertisement
Table of Contents
