Anritsu LMR Master S412E Programming Manual page 62

4-2 :CALCulate Subsystem
:CALCulate:MARKer{1|2|3|4|5|6}[:SET]:RLEVel
Title: Marker to Reference Level
Description: Sets the reference level equal to the measured amplitude of the
Front Panel Access: Marker, Marker to Ref Lvl
:CALCulate:MARKer{1|2|3|4|5|6}[:STATe] OFF|ON|0|1
:CALCulate:MARKer{1|2|3|4|5|6}[:STATe]?
Title: Marker State
Description: Sets the specified marker on/off.
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: OFF
Example: To turn off reference marker #1:
Front Panel Access: Marker, On/Off
4-20
specified marker. Note that this may result in a change to the input
attenuation.
:CALCulate:MARKer1:STATe OFF
PN: 10580-00319 Rev. N
Spectrum Analyzer Commands
S412E PM