Fujitsu MB90460 Series Hardware Manual page 653

APPENDIX
●
Meaning of abbreviations used for reading and writing
R/W:Read and write enabled
R:Read-only
W:Write-only
●
Explanation of initial values
0:The bit is initialized to 0.
1:The bit is initialized to 1.
X:The initial value of the bit is undefined.
-:The bit is not used. Its initial value is undefined.
●
Instruction using IO addressing e.g. MOV A, io, is not supported for registers area 003FE0
003FFF .
H
*: These registers are not present in MB90465 series.
634
to
H