Fujitsu MB90460 Series Hardware Manual page 412

Table 15.4-10 Noise Cancellation Control Register (NCCR) Bits
Bit name
S21,S20:
bit7,
Noise width
bit6
selection bits
S11,S10:
bit5,
Noise width
bit4
selection bits
S01,S00:
bit3,
Noise width
bit2
selection bits
D1,D0:
bit1,
Noise width
bit0
selection bits
• These bits are used to specify the noise pulse width to be removed for SNI2 pin.
• These bits are used to specify the noise pulse width to be removed for SNI1 pin.
• These bits are used to specify the noise pulse width to be removed for SNI0 pin.
• These bits are used to specify the noise pulse width to be removed for DTTI1 pin.
CHAPTER 15 MULTI-PULSE GENERATOR
Function
393