Fujitsu MB90460 Series Hardware Manual page 396

Table 15.4-3 Output Data Upper Register (OPDR) Bits
Bit name
BNKF, RDA2 to
bit15
RDA0:
to
OPDBR register
bit12
selection bits
OP51, OP50:
bit11, OPT5 output
bit10 waveform
selection bits
OP41, OP40:
bit9, OPT4 output
bit8 waveform
selection bits
• These bits indicate the addresses of the OPDBR registers and decide which
Output Data Buffer Register value is loaded into the OPDR register.
• These bits are used to select the kind of the output waveform to the OPT5 pin.
• These bits are used to select the kind of the output waveform to the OPT4 pin.
CHAPTER 15 MULTI-PULSE GENERATOR
Function
377