Avaya S8700 Maintenance Manual page 2562

Maintenance-Object Repair Procedures
Error Log Entries and Test to Clear Value
Error Aux
Type Data Associated Test
1
0 0 Any
1 (a) 0 SCOTCH Sync
Loop-Around test
(#1275)
257 (b) 0
3585 (c) 0, 1 TDM Loop-Around
test (#1285)
1. There is no short test sequence for this MO. Every test is available in the long test sequence. Refer to each
appropriate test's description, and follow its recommended procedures.
Notes:
a. Error Type 001: SCOTCH Synchronous Loop-Around test (#1275) failed.
1. Test the port (test port UUCSSpp long).
2. See
b. Error Type 257: VAL port detected overrun or underrun condition that can
indicate a hardware problem.
1. Test for hardware problem (test port UUCSSpp long).
2. See
3. Clear the alarm (test port UUCSSpp long clear).
c. Error Type 3585: TDM Port Loop-Around test (#1285) failed.
1. Test the port (test port UUCsspp long).
2. See the
8-1840 Issue 1 May 2002
Alarm
Level
Any
MINOR
WARNING
MAJOR
''SCOTCH Synchronous Loop-Around Test (#1275)'' on page
8-1843 repair procedures.
''SCOTCH Synchronous Loop-Around Test (#1275)'' on page
8-1843 repair procedures to verify repair.
TDM Loop-Around Test (#1285)
On/Off
Board Test to Clear Value
Any test port UUCSSpp l
ON test port UUCSSpp l r 3
OFF
ON test port UUCSSpp l r 3
Continued on next page
repair procedure.
555-233-143