Tray 2 Feeder Assembly (Pl3.2.1) - Xerox Phaser 6280 Service Manual

Service Parts Disassembly

Tray 2 Feeder Assembly (PL3.2.1)

8-36
1. Remove the Rear Cover (page 8-12).
2. Remove the Right Side Cover (page 8-13).
3. Remove the PH Drive Assembly (page 8-73).
4. Remove the Registration Clutch (page 8-40).
5. Remove the Feed Clutch (page 8-41).
6. Remove the Tray 1 (MPT) Roll (page 8-32).
Note
It is not necessary to remove the Tray 1 (MPT) No Paper Sensor
(PL3.1.15) and the Cover Sensor (PL3.1.16).
7. Remove 2 screws (10 mm) securing the MPT Chute (PL3.1.14) to the
printer.
8. Move the MPT Chute to the side away from the Feeder Assembly.
Phaser 6280 Color Laser Printer Service Manual
s6280-195