Show History - Allied Telesis AT-IX5-28GPX Manual

CLI N C
AVIGATION OMMANDS

SHOW HISTORY

show history
Overview This command lists the commands entered in the current session. The history
buffer is cleared automatically upon reboot.
The output lists all command line entries, including commands that returned an
error.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
Syntax
show history
Mode User Exec and Privileged Exec
Example To display the commands entered during the current session, use the command:
awplus#
Output Figure 1-2:
76 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
"Getting Started with AlliedWare Plus" Feature Overview
Guide.
show history
Example output from the show history command
1 en
2 show ru
3 conf t
4 route-map er deny 3
5 exit
6 ex
7 di
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A