Clear Power-Inline Counters Interface - Allied Telesis AT-x510-28GTX Command Reference Manual

P E C
OWER OVER THERNET OMMANDS
-
CLEAR POWER INLINE COUNTERS INTERFACE

clear power-inline counters interface

Overview This command will clear the counters from a specified port, a range of ports, or all
ports on the switch. If no ports are entered then PoE counters for all ports are
cleared. It will also clear all Power over Ethernet (PoE) counters supported by the
Power Ethernet MIB (RFC 3621).
clear power-inline counters interface [<port-list>]
Syntax
Mode Privileged Exec
Usage The PoE counters are displayed with the
Examples To clear the PoE counters for port1.0.2 only, use the following command:
awplus#
To clear the PoE counters for port1.0.5 through port1.0.8, use the following
command:
awplus#
port1.0.5-port1.0.8
To clear the PoE counters for all ports, use the following command:
awplus#
Validation show power-inline counters
Commands
C613-50102-01 REV C
Parameter
<port-list>
clear power-inline counters interface port1.0.2
clear power-inline counters interface
clear power-inline counters interface
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Selects the port or ports whose counters are to be cleared.
show power-inline counters command.
647