D-Link DXS-3600 Series Reference Manual page 1102

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Command Default Level
Level: 1.
Usage Guideline
This command is used to display information of SMTP.
Example
This example shows how to display SMTP information.
Switch# show smtp
SMTP Server Address
SMTP Server Port
Self Mail Address
Index Mail Receiver Address
----- ----------------------
1 receiver1@domain.com
2 receiver2@domain.com
3 receiver3@domain.com
4 receiver4@domain.com
5 receiver5@domain.com
6 receiver6@domain.com
7 receiver7@domain.com
8 receiver8@domain.com
Switch#
94-6 smtp send-testmsg
This command is used to check the reachability of the SMTP server.
smtp send-testmsg
Parameters
None.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to check the reachability of the SMTP server. An email will be sent to all of the
configured recipients.
Example
This example shows how to send a test mail to all users currently configured in the recipient list.
: 172.18.208.9
: 25
: switch@domain.com
1102